Water heaters are an integral part of life in today’s world, making the system of water heating seamless, instant and ready to use anytime. However, you will be awestruck with the revelation about the contribution it makes to the global greenhouse gas emission. The magnitude at which it damages the ecology by providing a boost to greenhouse effect can astound you. We have put on records some of the mind-boggling statistics as stated below throwing lights on the extent at which hot water service jeopardizes the cause of living life in a sustainable manner.
- In Australia, heating systems account to be the largest contributor to greenhouse gas emission, that is almost 23%.
- It consumes approximately 21% of the total energy generated in the country.
- In Australia, energy consumed in water heating comes from variant sources, with natural gas being the primary source with 48% of energy being used from this source, and 45% from electricity, 3% of the energy is derived from liquefied petroleum gas (LPG) and the rest 4% from solar power.
- Most surprisingly, only half of the total population of Australia uses electrical heaters, but that count is responsible for the emission of 80% of water greenhouse emissions.
Now all these accounts and facts certainly bear testimony of the growing importance of being vigil and alert while making a choice and pick of hot water service for your entire household which needs to be energy efficient with reduced greenhouse gas emitting system for it to be able to save your money on energy bills. It is required to go green to help the environment prosper from a greater perspective.
Choosing Efficient Hot Water Service
Buying a hot water system is not something which you do quite often, for it is something you install once, and it gives you service for decades. Thereby a little bit of research and time to take a wise decision and choosing the appropriate type of hot water service for your home is something worthwhile that you won’t regret.
There are basically two types of hot water service when it comes to the running hot water or getting it stored in a reservoir. In the first type of hot water service, bulk amount of water is heated at a time and stored while you can use that throughout the day or until it remains hot. In the second type, you don’t store hot water, rather you get instant hot water and as much as you need. Both have their advantages and disadvantages. Primarily stored hot water service takes little longer to turn the water hot since it heats up an entire tank of water before it resumes supply. However, in instantaneous flow systems, you get water readily within a few seconds. But comparatively, the instant hot water service consumes more power since it uses more energy to heat up a small amount of water immediately.
The heating systems available in the market come in an extensive range of different type of energy they use to fire up the heater. There are electrically operated ones, natural gas-operated heaters, Heat pump heaters and solar-powered heaters. Undoubtedly using the solar power operated hot water service are the best since they depend on a source of energy which is infinite. However, the installation charges of heaters powered by solar energy are higher. Even heat pumps which extract heat from the air outside to heat up the water tank is also an energy-efficient system.
Therefore, while choosing from the above types of systems, it is important that you consider your requirement of hot water services for the entire day in the light of the parameters characterized by number of members in the family using hot water, types of work requiring hot water, your budget for buying a system as well you monthly budget in energy bills. Go through the available brands, prices and energy consumption of preferable models of hot water service. You can also check if you have provision to use off-peak electricity in your house since this mechanism consumes comparatively less energy and results in lesser expenditure for electricity.
