You press the remote, the motor whirs, but the garage door barely moves. Or perhaps you heard a loud bang from the garage that sounded like something heavy hitting the floor. In many cases, the culprit is a broken garage door spring.
Springs are one of the most important parts of any garage door, yet most homeowners never think about them until one fails. Here’s why springs break, how to tell when there’s a problem and why replacing them is a job best left to professionals.
What garage door springs actually do
Garage doors are heavy. A typical double sectional door can weigh well over 100 kilograms. The motor doesn’t lift all of that weight on its own. Instead, springs counterbalance the door, storing energy as it closes and releasing it to help lift the door as it opens.
Sectional doors usually use torsion springs mounted above the opening, while roller doors use springs inside the barrel or drum. Either way, when the springs are working properly, the door feels light and moves smoothly. When they fail, the door becomes extremely heavy and difficult to operate.
Why springs break
The most common reason springs break is simple wear. Every time the door opens and closes, the spring goes through a cycle of tension and release. Springs are rated for a certain number of cycles, and once they reach the end of their life, the metal fatigues and eventually snaps.
Rust also shortens spring life. Moisture, coastal air and humidity can cause corrosion that weakens the coils. Lack of maintenance, incorrect tension, poor-quality springs and temperature changes can all contribute to early failure as well.
How often you use the door matters
A household that uses the garage as its main entry point might open and close the door several times a day. Over a year, that adds up to thousands of cycles. Families with multiple drivers, or homes where the garage is used as a workshop, will see their springs wear out faster.
If your garage door is your front door in practice, it’s worth having the springs inspected regularly so you can plan a replacement rather than being caught out by a sudden failure.
Signs your springs are wearing out
Springs rarely fail without some warning. Common signs include the door feeling heavier than usual, moving unevenly or jerking as it opens, or the motor straining and working harder than normal. You might also notice gaps or stretching in the coils, or hear creaking and squeaking.
If the door opens part of the way and then stops or comes back down, the springs may no longer be providing enough support. Paying attention to these signs gives you time to arrange a repair before the spring breaks completely.
What happens when a spring breaks
When a spring snaps, you’ll often hear a loud bang. Afterwards, the door may refuse to open, open only a few centimetres, or feel incredibly heavy if you try to lift it manually. Some doors may close suddenly or crookedly.
If this happens, stop using the door. Continuing to run the motor can damage it, strain cables and tracks or cause the door to fall. Disconnect power to the opener if you can do so safely, and call a garage door technician.
Why spring replacement isn’t a DIY job
Garage door springs are under enormous tension. When handled incorrectly, they can release that energy suddenly, causing serious injury. Tools can be thrown, fingers crushed and doors can fall without warning.
Professional technicians have the right tools, training and experience to release and adjust tension safely. They also know how to select the correct springs for your door’s weight and size, which is essential for smooth and safe operation. Online videos make it look simple, but the risks are real.
Getting the right replacement
A professional will measure your door and choose springs with the right specifications. Using incorrect springs can make the door unbalanced, which puts strain on the motor and other components and can shorten their life.
Many technicians recommend replacing both springs at once on doors that use a pair, since the second spring is usually close to the end of its life too. Upgrading to higher-cycle springs can also be worthwhile if your door is used frequently.
Preventing future spring problems
Regular servicing helps extend spring life. A technician can lubricate moving parts, check tension, inspect cables and tracks and spot wear before it becomes a problem. Keeping the door balanced also reduces stress on the springs and the motor.
Between services, keep an eye and ear out for changes in how your door moves. Catching issues early is usually cheaper and safer than waiting for a breakdown.
If a spring has snapped or your door feels heavy, book professional garage door repairs rather than attempting the job yourself.
Leave it to the experts
Garage door springs do a big job quietly in the background, and they will eventually wear out. When they do, resist the temptation to fix them yourself. The safest and most reliable solution is to call an experienced garage door repair technician who can replace them correctly and get your door working smoothly again.

